Getting started

Draw a room, put a door and a window in it, furnish it and export it.

The screen

  • Library on the left: the drawing tools under Build, then everything you can place, by category. On iPhone it opens from the button at the bottom left.
  • The plan in the middle, with rulers along the top and left edge.
  • Context bar floating at the top of the plan: the options of the current tool, and the actions a keyboard would otherwise give (Finish, Other side, Rotate, Delete).
  • Inspector on the right: the exact values of what is selected. With nothing selected it shows the plan’s settings and the list of rooms.
  • Status bar at the bottom: a hint for the current tool, the pointer position, and the Ortho and Guides switches.

Draw the first room

  1. Create a new plan. It starts on the Wall tool.
  2. Tap the first inside corner of the room.
  3. Move in the direction of the wall, type its length, for example 400, and press Return. On a touch screen: type the length in the context bar, then tap in the direction the wall runs.
  4. Do the same for the next walls. Walls run square; the Angle menu in the context bar switches to 15° steps or any angle (on a keyboard: hold Shift or Option).
  5. Tap the first corner again to close the room.

The wall thickness builds outward. The numbers on the walls are the clear lengths you typed.

Add a door and a window

Pick Door (D) and tap a wall. Drag the door along the wall, or select it and tap one of the orange clearance numbers to type its distance from the corner. Window (N) works the same way.

Furnish

Open a category in the library, pick an object and tap where it goes. Near a wall it lines up with the wall and faces the room. Press R, or use Rotate in the context bar, to turn a free-standing object.

Look at it in 3D

Switch from Plan to 3D at the top. Drag to orbit.

Export

Open the Export menu in the toolbar. Export PDF… makes the plan set with a sheet per trade, Material List… shows what to buy, Export PNG… saves a quick image. See Export.

Next