Doors and windows

Hinged doors, pocket sliding doors and windows, and how to place them exactly.

Placing

Pick Door (D) or Window (N) and tap a wall. A preview shows where the opening will land. Drag it along the wall afterwards, or nudge it with the arrow keys: 1 cm per press, 1 mm with Shift.

A new door is 86 cm wide and 210 cm high. A new window is 100 cm wide and 80 cm high.

Placing exactly

Select the door or window. Orange numbers show the clear distance on each side: to the face of the wall that ends this one, or to the next door, window or object on the same wall.

Tap a number and type the distance you want. The opening moves and keeps its width. The same two fields are in the inspector under Clearance.

Hinged doors

In the inspector:

  • Width and Height
  • Hinge left or right
  • Opens into the room or outward

The swing is drawn on the plan.

Pocket sliding doors

Set Type to Pocket sliding. The leaf then runs into a cassette inside the wall.

  • Leaf: glass or wood
  • Leaf size: 86 × 198.1, 86 × 210.6, 98.5 × 198.1 or 98.5 × 210.6 cm, or your own
  • Slides to: the side the leaf disappears into
  • Shown: open or closed (display only)

What follows from the leaf:

Value Rule
Clear passage leaf width minus 4 cm (an assumption; check your cassette’s data sheet)
Wall opening 2 × leaf width + 5.2 cm wide, leaf height + 8.4 cm high
Finished wall 12.5 cm (CW 75) or 15 cm (CW 100)

The cassette is part of the door: it is kept inside the wall, and it counts when clearances are measured.

Windows

Width, Height and Sill height in the inspector. In the 3D view the wall below the sill and above the window stays.

Removing

Select the opening and press Delete, or use Delete in the context bar. Deleting a wall removes its doors and windows with it.